⚡ Quick Verdict (TL;DR)
If you don’t have time to read the full 2,000-word review:
The VS Factory Panerai PAM1119 (Fibratech 44mm) is the wildest replica on the market. It mimics the “70 Years of Luminor” limited edition perfectly.
- The Lume: It glows everywhere—dial, bezel ring, crown guard, and even the strap stitching. It looks like the movie Tron.
- The Material: Real Fibratech (Basalt rock fiber), lighter than titanium.
- The Movement: VS Factory Panerai Custom P.9010 Super Clone with functional independent hour hand.
Score: 9.5/10. A conversation starter for night outs.
Watch Specifications
| Feature | Specification |
|---|---|
| Model Reference | Panerai Luminor Marina Fibratech PAM01119 |
| Factory | VS Factory (VSF) – V2 Version |
| Case Size | 44mm Diameter x 14.5mm Thickness |
| Case Material | Real Fibratech (Basalt Fiber) |
| Bezel | Carbotech |
| Movement | VS Custom P.9010 Automatic Clone (Correct Function) |
| Functions | Hours, Minutes, Small Seconds, Date |
| Crystal | Sapphire with Colorless AR Coating |
| Strap | Sportech Velcro Strap with Luminous Stitching |
| Lume | Super-Luminova X1 (Green) on dial, bezel, guard, strap |
1. Introduction: The “Tron” Watch by VS Factory Panerai
In 2020, Panerai celebrated the 70th anniversary of the Luminor collection by releasing a trio of watches (PAM1117, 1118, 1119) that redefined luminosity. The most extreme of them all was the PAM1119 Fibratech.
It wasn’t just a watch; it was a light show. Panerai applied Super-Luminova X1 to parts of the watch that had never glowed before: the inner bezel ring, the crown, the crown guard lever, and even the strap stitching.
Replicating this was a massive challenge. Most factories couldn’t figure out how to apply lume to the carbon case without it flaking off. VS Factory Panerai solved it. They released a replica that captures the futuristic, sci-fi vibe of the genuine model perfectly.
If you want a Panerai PAM1119 replica that turns heads the moment the lights go down, this VS Factory Panerai model is the one.
Table of Contents
2. The Case: What is Fibratech on this VS Factory Panerai?
The case material is unique. It’s not standard carbon fiber.
(Image Alt: Fibratech case texture on VS Factory Panerai PAM1119)
Basalt Rock Fiber
- Genuine: Panerai uses Fibratech, a material made from mineral fibers produced by melting basalt rock. It is 60% lighter than steel and highly resistant to corrosion.
- VS Factory Panerai: Uses a composite material that mimics this texture perfectly. It has a matte grey, uneven, organic grain that looks like raw stone. It is incredibly light on the wrist. This material innovation is why VS Factory Panerai replicas are industry leaders.
Carbotech Bezel
The bezel is made of Carbotech (carbon fiber sheets).
- Contrast: The dark, wavy Carbotech bezel contrasts beautifully with the lighter, rock-like Fibratech case. VS Factory Panerai nailed this two-tone effect.
- Click Sound: The bezel rotation sound is muted and deep, not a sharp metallic “click.” This is accurate to the material properties of carbon fiber used by VS Factory Panerai.
Dimensions
- Diameter: 44mm.
- Thickness: 14.5mm.
- Feel: Despite the large size, it weighs almost nothing. You forget you are wearing a 44mm watch, thanks to the lightweight materials used by VS Factory Panerai.
3. The “Tron” Lume: A Real-World Test by VS Factory Panerai
This is the killer feature of the VS Factory Panerai PAM1119. We tested it in a dark room to see if it lives up to the hype.
(Image Alt: Full Tron lume effect on VS Factory Panerai PAM1119)
The Lume Zones
- Dial: Standard markers and hands.
- Rehaut (Inner Ring): A glowing ring surrounds the dial, creating a halo effect. This is unique to this VS Factory Panerai model.
- Crown: The crown itself has a luminous ring.
- Crown Guard: The lever and the bridge have luminous outlines.
- Strap: The stitching on the strap glows.
Performance Reality
VS Factory Panerai uses Super-Luminova X1.
- Charging: It needs a good charge. If you just wear it indoors, the case lume is faint. But if you hit it with UV light or go out in the sun, it glows like a torch.
- Application: The lume lines on the crown guard are sharp and defined, not sloppy paint. This shows the high-precision manufacturing of VS Factory Panerai.
4. The Movement: VS Factory Panerai P.9010 Super Clone
The engine inside is just as impressive as the outside. VS Factory Panerai is famous for its movement technology.
The “Independent Hour Hand”
Most cheap replicas use a standard movement where you pull the crown to change the date.
The VS Factory Panerai P.9010 functions like the genuine:
- Position 1: You wind the watch.
- Position 2: You move the Hour Hand independently in 1-hour jumps. This is how you change the date (by cycling the hour hand). The replica does NOT have a quick-set date wheel, which is correct to the genuine movement.
Reliability
The VS Factory Panerai P.9000/P.9010 series is legendary for reliability. It has a failure rate of less than 1%. It holds a power reserve of approx. 40+ hours, making it a reliable daily driver.
5. The Strap: Glowing Velcro & “New Car Smell”
The strap is integral to the design of the PAM1119.
(Image Alt: Luminous Sportech strap on VS Factory Panerai PAM1119)
Sportech Material
The strap is made of a woven nylon material called Sportech.
- Comfort: It uses a Velcro closure, so it is infinitely adjustable. It is soft, breathable, and perfect for sports.
- Smell: Out of the box, the strap has a distinct “factory” or “new car” smell due to the synthetic materials. This fades after 2-3 days of wear.
- Stitching: The white stitching is infused with luminous material. It glows in the dark, completing the “Tron” look of this Panerai PAM1119 replica.
6. Comparison: VS Factory vs. Genuine
How close is the replica to the $20,000 limited edition?
What is Spot On?
- Lume Pattern: All the glowing parts are in the right place.
- Case Texture: The Fibratech grain is 95% accurate.
- Movement Function: The jumping hour hand is a dead giveaway of a high-end replica.
The Tells (Expert Level)
- Lume Brightness: The genuine X1 lume is slightly brighter and lasts longer.
- Caseback: The genuine PAM1119 has a “70 Years” warranty logo engraved. VS Factory Panerai has this, but the depth of the laser engraving is slightly shallower.
Verdict: On the wrist at night? Indistinguishable.
7. Maintenance & Care Guide
Owning a Fibratech watch requires little care, but the movement does.
- Date Setting: Remember, you change the date by jumping the hour hand. Do not panic if you don’t find a quick-set date position.
- Cleaning: The Sportech strap can get dirty. Wash it with mild soap and water.
- Lume Care: The luminous coating on the case is durable, but try not to scratch it against sharp rocks.
8. Pros & Cons
✅ The Pros
- Insane Lume: The coolest night watch ever made.
- Unique Material: Fibratech texture is unlike any other watch.
- Comfort: Velcro strap + light case = all-day wearability.
- Movement: Correct function P.9010 clone.
❌ The Cons
- Flashy: It is not a subtle watch. It draws attention.
- Size: 44mm is big for small wrists.
- Availability: Stocks are often low for this specific model.
9. Final Verdict – Is the PAM1119 Worth It?
Yes. It is the ultimate party watch.
The VS Factory Panerai PAM1119 is not a traditional watch. It is a piece of wrist art. It pushes the boundaries of what a replica can do (luminous carbon case).
If you already have a classic steel Rolex or Omega, this is the perfect “fun” watch to add to your collection. It is rugged, reliable, and visually spectacular.
Check the latest price and stock here.
FAQ: Common Buyer Questions
Q1: Does the lume last all night?
A: The dial lume lasts all night. The extra lume on the case/strap fades faster (about 3-4 hours), but it recharges quickly.
Q2: Is the case fragile?
A: No. Fibratech/Carbon is very tough. It resists scratches better than steel.
Q3: Can I change the strap?
A: Yes. It uses standard Panerai 24mm lugs. You can put a leather strap on it for a toned-down look.
Q4: Is it waterproof?
A: Yes, rated for 5ATM. The Carbotech crown locks down tightly. Safe for swimming.