⚡ Quick Verdict (TL;DR)
If you don’t have time to read the full 2,200-word review:
The APS Factory Audemars Piguet Diver replica (15710ST Latest V3 Batch) is the undisputed king of AP Divers. It beats ZF Factory on movement architecture.
- The Movement: Custom 3120 Integrated Clone (Quiet rotor, correct balance wheel position).
- The Upgrade: V3 batch features bolder inner bezel fonts, fixing the V2 flaw on this Audemars Piguet Diver replica.
- The Case: Solid 316L steel with razor-sharp brushing.
Score: 9.7/10. The best Diver replica on the market.
Watch Specifications
| Feature | Specification |
|---|---|
| Model Reference | Audemars Piguet Royal Oak Offshore Diver 15710ST.OO.A002CA.01 |
| Factory | APS Factory (APS) – Latest V3 Batch |
| Case Size | 42mm Diameter x 13.9mm Thickness |
| Case Material | 316L Stainless Steel |
| Dial | Black “Méga Tapisserie” |
| Movement | APS Custom 3120 Automatic (Integrated) |
| Functions | Hours, Minutes, Seconds, Date, Inner Rotating Bezel |
| Crystal | Sapphire with Colorless AR Coating |
| Strap | Natural Rubber Diver Strap |
1. Introduction: The Evolution of the Audemars Piguet Diver Replica
The Audemars Piguet Diver replica (based on the 15710ST) is a legend in the community. Unlike the standard Royal Oak, the Offshore Diver is built for abuse. It features rubber-clad crowns, robust water resistance, and an internal timing bezel.
For years, the market for a high-quality Audemars Piguet Diver replica was a war between JF Factory and ZF Factory. They both used the noisy Miyota 9015 movement. While the cases were good, the “helicopter noise” of the rotor ruined the luxury feel.
APS Factory entered the chat with a nuclear weapon: the Integrated 3120 Movement. They didn’t just modify a Miyota; they built a clone engine from scratch.
Now, with the latest “V3” silent update fixing the inner bezel font, the APS 15710 is widely considered the “End Game” for any collector looking for the best Audemars Piguet Diver replica.
Table of Contents
2. A Brief History: From “The Beast” to the Diver
To understand why the Audemars Piguet Diver replica is so popular, we must look at its lineage.
- 1993 – The Beast: The Royal Oak Offshore was launched. It was huge (42mm was massive back then) and controversial.
- 2005 – The Scuba: AP released the first “Scuba” Offshore, the precursor to the Diver.
- 2010 – The Diver (15703): The classic Diver was born. Closed caseback, steel bezel.
- 2015 – The Update (15710): AP added a Sapphire Caseback to show off the beautiful 3120 movement.
This history is why the APS Factory version is so important. By replicating the 15710 with an open caseback, the movement must look perfect. APS is the only factory that achieves this.
3. The Case: Heavy Metal Architecture
The AP Diver is a tank. APS has captured its industrial beauty perfectly on this Audemars Piguet Diver replica.
(Image Alt: Side profile of Audemars Piguet Diver replica case finishing)
Dimensions & Weight
- Diameter: 42mm.
- Thickness: 13.9mm (Exact match to genuine).
- Weight: ~175g. It feels substantial, just like a genuine Audemars Piguet Diver replica should.
Brushing Quality
The vertical brushing on the case is deep and defined.
- The Bezel: The octagonal bezel features mirror-polished beveled edges (“Anglage”). The transition between the brushed top and polished side is razor-sharp.
- The Screws: The 8 hexagonal screws are recessed perfectly. On older Audemars Piguet Diver replica versions, they sometimes stuck out or were misaligned. APS has tight quality control here.
4. The Dial: Méga Tapisserie & V3 Update
The dial is where the latest APS batch shines for this Audemars Piguet Diver replica.
(Image Alt: Macro shot of the black dial on APS Audemars Piguet Diver replica)
The V3 Bezel Fix
On the previous V2 version, the numbers on the Inner Rotating Bezel were slightly too thin.
- The Fix: The latest batch has bolder, thicker fonts on the inner ring. The numbers “10, 20, 30, 40, 50” now pop with better visibility, matching the genuine look closely. This is a critical update for any serious Audemars Piguet Diver replica.
3D “Cap” Lume Application
APS uses a “Cap” style filling for the hour markers.
- Effect: The lume is not just painted flat; it is slightly domed/rounded on top. This gives the markers a 3D volume that reflects light from the sides.
- Tapisserie: The large squares on the dial are matte finished, contrasting with the glossy markers on this Audemars Piguet Diver replica.
Date Window
- Magnifier: The internal cyclops has a strong anti-reflective coating.
- Font: The date font is sans-serif, filling the window nicely.
5. Color Wars: Black vs. White vs. Funky
The 15710 comes in many colors. Which one should you buy?
- Black Dial (The Classic): The safest choice. It matches everything. The most accurate Audemars Piguet Diver replica because black hides minor flaws best.
- White Dial (The Summer Watch): Looks crisp and clean. However, the white rubber strap can get dirty over time.
- Funky Colors (Yellow, Orange, Lime, Purple): These are fun, but the rubber strap colors are very hard to replicate 100% accurately. The black dial remains the king of accuracy.
6. The Movement: Integrated 3120 Analysis
This is the technical heart of the review. The movement is why you buy APS over any other Audemars Piguet Diver replica.
(Image Alt: APS custom 3120 integrated movement on Audemars Piguet Diver replica)
Why “Integrated” is Better
- Structure: APS built the gear train into the main plate. This is not a “deco plate” glued onto a Miyota, which is common in cheaper Audemars Piguet Diver replica models.
- Balance Wheel: Located at 4 o’clock (Correct position). Miyota movements have it at 6 o’clock, which is an instant tell.
- Jewels: Real functional jewels, not glued-on red plastic.
Realism Check: Date Change
- Genuine: Slow date change (takes ~30 mins to roll over at midnight).
- APS Replica:Instant (Snap) date change.
- Note: This is a technical difference. While “Instant” is usually better in modern watchmaking, it is technically a “flaw” compared to the vintage-style slow change of the genuine 3120. However, most users prefer the instant snap on their Audemars Piguet Diver replica.
Winding Feel
The winding resistance is heavy and smooth, mimicking the torque of a large mainspring. It feels expensive, not loose and gritty like a cheap movement found in older Audemars Piguet Diver replica versions.
7. Functionality: The Dual Crowns
The Audemars Piguet Diver replica has two crowns, just like the genuine.
(Image Alt: 10 o’clock screw-down crown for inner bezel on AP Diver replica)
- 3 O’Clock: Time and Date.
- 10 O’Clock: Inner Bezel Adjuster.
- The Click: As you turn the 10 o’clock crown, the inner bezel rotates with distinct “clicks.” It is not a friction slide; it has a ratchet mechanism. APS replicated this click feeling perfectly. It feels mechanical and precise, crucial for a high-quality Audemars Piguet Diver replica. This allows you to time your dives accurately.
8. The Strap: High-Grade Rubber
A diver needs a good rubber strap. APS delivers on this Audemars Piguet Diver replica.
(Image Alt: Natural rubber strap and pin buckle on Audemars Piguet Diver replica)
Natural Rubber
- Material: APS uses high-grade natural rubber. It is soft, doesn’t attract dust, and doesn’t smell like chemicals.
- End Links: The strap is attached to the case with Moveable End-Links. This allows the watch to hug smaller wrists (down to 16.5cm) despite its large size. This is a key comfort feature for any Audemars Piguet Diver replica.
The Buckle
A simple, robust steel pin buckle with the “AP” logo engraved. The tang fits perfectly into the strap holes.
9. Night Vision: Lume Performance
A diver must be legible in the dark.
- Application: APS uses thick Super-Luminova. The application on the hands and markers is consistent.
- Brightness: After a 10-second charge, it glows bright green.
- Longevity: It remains legible for 4-5 hours in total darkness. While not as nuclear as a Panerai, it is very good for an Audemars Piguet Diver replica.
“The AP Diver has great lume, but if you want the absolute brightest watch on the market, you must see the VS Factory Panerai PAM1119 Fibratech which glows like a torch.”
10. Comparison: APS vs. ZF Factory
ZF Factory is the main rival. Which Audemars Piguet Diver replica is better?
| Feature | APS Factory (V3) | ZF Factory |
|---|---|---|
| Movement | Integrated 3120 (Clone) | Modified 9015 (Deco) |
| Rotor Noise | Quiet | Loud “Whizzing” |
| Balance Wheel | Correct (4 o’clock) | Wrong (6 o’clock) |
| Inner Bezel | Good (Updated) | Very Good |
| Date Change | Instant | Instant |
Verdict:
APS Factory wins easily. The movement architecture is superior. The ZF version is outdated technology wrapped in a nice case. For the best Audemars Piguet Diver replica, choose APS.
11. On-Wrist Experience: The “Royal Oak” Feel
How does it wear?
- Presence: It’s a big watch, but not huge. 42mm is wearable for most men.
- Comfort: The rubber strap makes it very comfortable. The weight makes it feel expensive.
- Vibe: It is the ultimate summer/vacation watch. It looks great with a t-shirt. It is a bold statement piece.
12. Maintenance Guide
- Rotor: If the rotor becomes noisy over time (rare on APS), a tiny drop of Moebius 9010 oil on the bearing fixes it instantly.
- Crowns: Always screw them down! The 10 o’clock crown is often forgotten. If left open, water will enter your Audemars Piguet Diver replica.
- Rubber: Wash the strap with soap warm water to keep it looking matte and fresh.
13. Pros & Cons
✅ The Pros
- Best Movement: The 3120 Super Clone is quiet and accurate.
- Caseback View: Finally, a movement worth showing off on an Audemars Piguet Diver replica.
- Build Quality: Rock solid steel work.
- V3 Update: Inner bezel font is fixed.
❌ The Cons
- Instant Date: Technically not “true to gen” (which is slow), but functionally better.
- Lume: Good, but not as nuclear as a Panerai.
14. Final Verdict – Is the APS 15710 Worth It?
Yes. It is the definitive AP Diver.
If you want an Audemars Piguet Diver replica with a see-through caseback, APS Factory is the only choice. The Clone 3120 movement transforms the watch from a “noisy fake” to a “refined timepiece.”
With the V3 updates fixing the dial font, there is no reason to look elsewhere.
Check the latest price and stock here.
FAQ: Common Buyer Questions
Q1: Is it waterproof?
A: Yes, rated for 5ATM. Safe for swimming. Ensure both crowns are tight on your Audemars Piguet Diver replica!
Q2: Can I swap the strap?
A: Yes. It uses the standard AP screw system. You can put on a leather strap or a steel bracelet.
Q3: Does the rotor spin loudly?
A: No. Unlike the ZF/JF Miyota versions, the APS 3120 is much quieter. It sounds like a normal automatic watch.
Q4: Is the bezel ceramic?
A: No, the 15710 bezel is brushed stainless steel. The 15707 is the ceramic model.